Frequently Asked Questions

reoXapp is an AI-powered reinforcing steel takeoff tool. Upload your architectural and structural PDFs and get a full bar mark schedule back — bar marks, cut lengths, bend shapes, mesh, chairs and accessories — usually in minutes.

No. You can do a casual one-off takeoff through the guest checkout for $14.55, no account needed. If you're taking off jobs regularly, a subscription gives you a monthly upload allowance instead of paying per job.

Architectural and structural/engineering PDFs — the same plan set you'd hand to a steel detailer or steel fixer.

House slabs (both conventional slab-on-ground and waffle pod systems), shed slabs, retaining walls, pools, footings, driveways and other small-scale reinforcing steel jobs. Multi-level structures aren't supported yet.

reoXapp reads each bar mark's diameter and cut length off your plans, then applies real reference mass-per-metre figures for deformed (N) reinforcing bar — actual manufactured mass, not the theoretical round-bar figure — to get a real weight for every bar and for the job total.

Upload your plans to reoXapp. It reads bar marks, shapes, cut lengths, lap lengths and hook dimensions straight off the drawings and hands back a ready-to-print bar bending schedule — usually minutes, not the days a manual detailing turnaround typically takes.

Yes. reoXapp reads lap lengths, anchorage lengths and development lengths directly from your structural notes and applies them to the relevant bar marks, alongside bend shapes and hook dimensions.

Yes — slab mesh, trench mesh, bar chairs, spacers, dowels and sleeves, vapor barrier, ableflex and tie wire are all calculated automatically from your plans, not just the bar marks.

reoXapp is an automated estimation tool, not a certified engineering output. It's entirely your discretion whether a takeoff is used, and reoXapp accepts no responsibility for the accuracy of any takeoff at any time — always thoroughly double-check every takeoff before ordering material, fabrication, or quoting. See our Terms of Service for the full detail.

If a plan is ambiguous or a quantity can't be confidently determined, reoXapp flags it for you rather than guessing silently. You answer what you can, then re-run the takeoff — your answers are given to the next extraction as confirmed facts.

Yes. Every casual one-off purchase includes one free correction re-run using your clarified answers. Subscribers can re-run a job at any time within their plan's usage allowance.

A casual one-off takeoff is $14.55 inc. GST, no account needed. Subscriptions start from a Standard plan with a monthly upload allowance for regular users — see current Beta pricing on the homepage.

Yes — every price shown on reoXapp is the total price including GST.

A fast, one-click quote built from your job's real totals and your own saved pricing rates — no need to enter job data again. You can download it as a PDF or email it straight to a client.

Yes. Subscribers can set their own rates — itemized by bar diameter, mesh type and accessory, or a simpler $/tonne mode — and generate a full itemized Cost Estimate for any job.

Yes. Resellers get the same takeoff and Cost Estimate tools as any other account — turn a customer's plans into an accurate order in minutes, set your own pricing, and generate branded quotes with your own logo.

Use the "Message us" widget available on every page, or reach out to us directly through your usual channel.